Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "haro"

$599.99
Enjoy quality time with your little ones or haul around groceries with Sunlite's Hard Shell Deluxe Trailer Tot. Its protective steel frame is covered with 600D polyester and comfortably fits two children. It also converts to a cargo trailer with side rails. If the weather turns sour, the trailer's canopy keeps your children dry and reflective accents enhance visibility. The Deluxe Trailer Tot easily connects to your bike's axle and its quick-release 20-inch aluminum wheels roll smoothly along the pavement behind you.
$499.00
While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning
$299.95
- Axle/Spacing: 10/14 x 135mm nutted - International Standard 6-bolt disc rotor mount - 11 tooth (1/8") steel cog is pre-installed, ideal for compact drivetrain setup - Tough, instant pickup 120 point triple wedge pawl system with a bushed mini threaded driver for Singlespeed and Dirt Jump - Bushed driver is more durable than cartridge bearings - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame), 14mm adapters included
$199.95
- Axle/Spacing: 10/14 x 135mm bolt-on - 14mm adapters included - Micro-drive cassette rear hub for singlespeed and dirt jump - International Standard 6-bolt disc rotor mount - Bushed driver for greater durability over cartridge bearings (bearings have to be smaller for micro-drive, thus prone to higher loads) - Forged 6061 aluminum shell, 2 main body sealed cartridge bearings - CrMo M10 bolt-in fittings with 6mm anti-rotation hex fitting (helps when tightening wheel in frame) - 12mm thru-axle conversion for DJD-BD available separately - No cog included - 9/10/11/13/16t mini sprockets available separately
$159.00
The name Dimension contains the importance of the project itself: to create an innovative product in terms of size, design and ergonomic shape suitable for all disciplines and perfect for men and women. Dimension is comfort, performance and lightness. The combination of short nose (35mm less than a traditional saddle) and PAS system ensures blood flow and pressure relief, ensuring comfort even in aerodynamic position or maximum pushing phase. The wider seating area (width 143mm) allows a better distribution of body weight. - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 190g
$135.00
The Prologo Scratch M5 PAS uses innovative technology in terms of size, shape, and ergonomics, and is suitable for many uses and disciplines. Thanks to the new design, size, and ergonomic "T-Shape," Scratch M5 is suitable for men and women. The new MSS Multi Sector System improves comfort and performance, and the active foams that separate from each other create 5 mapped zones that work individually, supporting normal pedaling movement both during the pushing and pulling phases. The round shape of the Scratch M5 allows the pelvis to rotate naturally, creating stability and support for the lumbar areas. Despite the absence of a channel, the open base is able to eliminate pressure peaks. The PAS is a channel designed to eliminate pressure peaks and numbness, improving blood flow. Its particular ergonomic design, assisted by variable density foams, eliminates contact points and is ideal for users who prefer performance combined with comfort over long and medium distances. - Ergonomic multi-category saddle - Round shape increases sitting area and better support to the pelvic zone - Tirox is a light alloy steel with a standard round size of 7 mm - Long carbon-fiber base - Light padding with a microfiber cover - Multi Sector System (MSS) features individual zones mapped and separated along the saddle, each composed of different interactive foams and single-cell padding - Clamp Style: Standard Rails - Material: Synthetic - Length: 250mm - Width: 140mm - Weight: 185g
$135.00
The Prologo Scratch M5 PAS uses innovative technology in terms of size, shape, and ergonomics, and is suitable for many uses and disciplines. Thanks to the new design, size, and ergonomic "T-Shape," Scratch M5 is suitable for men and women. The new MSS Multi Sector System improves comfort and performance, and the active foams that separate from each other create 5 mapped zones that work individually, supporting normal pedaling movement both during the pushing and pulling phases. The round shape of the Scratch M5 allows the pelvis to rotate naturally, creating stability and support for the lumbar areas. Despite the absence of a channel, the open base is able to eliminate pressure peaks. The PAS is a channel designed to eliminate pressure peaks and numbness, improving blood flow. Its particular ergonomic design, assisted by variable density foams, eliminates contact points and is ideal for users who prefer performance combined with comfort over long and medium distances. - Ergonomic multi-category saddle - Round shape increases sitting area and better support to the pelvic zone - Tirox is a light alloy steel with a standard round size of 7 mm - Long carbon-fiber base - Light padding with a microfiber cover - Multi Sector System (MSS) features individual zones mapped and separated along the saddle, each composed of different interactive foams and single-cell padding - Clamp Style: Standard Rails - Material: Synthetic - Length: 250mm - Width: 140mm - Weight: 189g
$129.00
The name Dimension contains the importance of the project itself: to create an innovative product in terms of size, design and ergonomic shape suitable for all disciplines and perfect for men and women. Dimension is comfort, performance and lightness. The combination of short nose (35mm less than a traditional saddle) and PAS system ensures blood flow and pressure relief, ensuring comfort even in aerodynamic position or maximum pushing phase. - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic - Length: 245mm - Width: 143mm - Weight: 150g
$125.00
Prologo Proxim W650 E-Bike saddle introduces a new revolutionary technology, the Multi-Sector System: three different individual zones mapped and separated along the saddle, each composed of different interactive foams and single-cell padding. These areas work independently, adapting to all the positions that cyclist can take. - The W650 also features a central tunnel (Prologo’s PAS system) that eliminates numbness and reduces the compression of soft issues, improving blood flow in the pelvic area - Rear Cover: Designed to increase grip in all weather conditions - Rear handle and reflective graphics: The saddle is equipped with a rear "handle" to facilitate the movement of the bicycle as well as a graphic with reflective materials to improve safety - E-bike specific but all-terrain and multi-category saddle - Semi-round shape, Proxim W650 is more flexible allowing greater freedom of movement and facilitating each pedal stroke - Rail Material: Ti-Rox - Clamp Style: Standard Rails - Material: Synthetic
$99.99
A true bmx classic. The Hazard Lite is respected because of its strength, reliability and light weight. Often imitated but never matched in quality or durability. The Hazard Lite is the rim of choice for some of the world’s best riders. - Fully welded joint construction - Directional spoke hole drilling
$99.95
- Light but strong enough for all types of riding including XC through DH - Forged CNC machined aluminum shell 2 sealed cartridge bearings - International Standard 6-bolt disc rotor mount - End caps for 9x100mm QR available separately - Boost version (HL-3208) is 15x110mm only - Flange diameter: 58mm left/right - Center to flange: 22mm left 30mm right
$95.95
- Replacement driver for Original DJD or DJD-Bush Drive rear hub - Need DJD Original removal tool or DJD Bush Drive removal tool (sold separately)
$84.95
- Axle/spacing: 10 x 120mm nutted - Hole: 32-hole - Weight: 304g - CNC machined, high-polished, high-flange aluminum shell - Japanese sealed cartridge bearings - Hollow CrMo nutted axle with titanium color finish - 120mm OL spacing rear hub with either double fixed flip-flop threading or fixed on one side and freewheel thread on the opposite - 130mm OL rear axle conversion sold separately
$79.95
- Axle/Spacing: 9 x 100mm nutted - Hole: 32-hole - Weight: 252g - CNC machined, high-polished, high-flange aluminum shell - Japanese sealed cartridge bearings - Hollow CrMo nutted axle with titanium color finish
$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
$69.95
- Premium CrMo freewheel with 6-pawl, 72-point pickup for instant engagement - 3/32-inch teeth accept 3/32 or 1/8-inch chains. - Thread: 1.37-inch x 24tpi standard R/H threaded
$69.95
- Chromoly freehub body for Spin Doctor 6-Drive rear hub - HyperGlide 8-11-speed - Shimano/SRAM 8-10-speed, Shimano 11-speed mountain cassette compatible - Compatible with road and mountain 6-Drive hubs
$69.00
The Prologo Kappa is a saddle suitable for road and off-road. It's designed to ensure a high level of comfort without neglecting performance. - The semi-round shape is the best compromise for medium and long distances and ideal for rider with a medium lumbar flexibility - T20 chromoly rail with standard round size of 7mm - Injected-nylon base to better absorb shocks and vibrations - Light padding and microfiber cover - The base has a central hole, which reduces pressure peaks - Clamp Style: Standard Rails - Material: Synthetic - Length: 265mm - Width: 147mm - Weight: 268g
$64.95
Casual, warm, water-resistant men's jacket The Hero Dirt Coaches Jacket celebrates that which we all seek-the dirt so perfect it lets us be heroes-and keeps you keep warm to boot. This lightweight jacket features a soft and warm interior lining and DWR coating to keep wind and light rain off you. - DWR coating to shed light moisture - Dual hand pockets - Soft interior liner for comfort and warmth - Snap button front placket MATERIALS - 100% nylon Taffeta, 66Gr/M2
$59.99
Old School Neoprene guards are the most comfortable protective gear you will ever wear. Designed by Lizard Skins and manufactured in our Utah Facility. Made of 5 mm perforated Airprene, ¼ inch foam inserts, injected molded plastic inserts and a 2 mm Powertex crash panel. Shin Guards are available in a one size fits all model.
$54.95
GOODBYE ACHY JOINTS & MUSCLES HALO accelerates joint recovery, reduces exercise-induced inflammation, and reduces downtime following overuse injuries. HALO provides comfort to muscles and joints that are sore and aching so you can train harder and recover faster. - Increases joint health & comfort* - Reduces inflammation & soreness* - Accelerates joint & muscle repair* *exercise-induced or following-exercise US PROVISIONAL PATENT #63229703 SO EFFECTIVE WE PATENTED IT Most everyone has heard of the benefits of curcumin, and plenty of athletes have tried it with little or no success. The main reason is because curcumin is very unstable. It spontaneously breaks down in the body before it gets where it needs to be to work. The technology that makes HALO special wasn’t available so we developed it. The key to realizing the benefits of curcumin is our proprietary Superba2® phospholipid delivery system that protects the curcumin from your body’s natural tendency to deactivate it, and allows it to be delivered and absorbed effectively. THE CUMULATION OF 18 YEARS OF RESEARCH WE CRACKED THE CODE Our proprietary delivery system not only protects the curcumin by keeping it stable in the body, it also allows it to be absorbed and delivered to where it works - inside cell membranes. The key to making curcumin effective is Superba2®, a special krill oil that protects curcumin from your body's natural tendency to deactivate it, and delivers both the curcumin and omega-3 phospholipids to cell membranes much more efficiently than fish/algal oils of any strength. Superba2® is uniquely compatible with cell membranes, so - even compared to other phospholipids - it reduces the process for membrane uptake from around 20 steps to 3-4 steps, getting curcumin and omega-3s where they need to be more efficiently, get fully absorbed, and produce anti-inflammatory effects. IMPROVES JOINT MOBILITY AND COMFORT REINFORCE THE WEAKEST LINK Joints and muscles bear the brunt of endurance training abuse. HALO’s Curcuminoids and Omega-3 phospholipids reduce late-onset soreness, exercise-induced inflammation, downtime following falls, and the impact of lingering minor injuries by signaling the musculoskeletal system to kickstart repair and adaptation processes, providing comfort to muscles and joints that are sore and aching from training or overuse. THE 95% PENALTY 95% of the population is deficient in omega-3s. That’s compounded by endurance exercise, impacting performance, mental processes, and recovery. Cardiovascular, cognitive, musculoskeletal—virtually no major body system is unaffected. Superba2™ omega-3 phospholipids are bioidentical to your cell membranes, so they don’t require additional processing steps for uptake. By improving membrane function, HALO supercharges endurance exercise capacity and energy production. DON’T LET ANYTHING SLOW YOU DOWN Almost every athlete has had training derailed by a nagging minor injury. That’s why we developed HALO, a proprietary combination of Curcuminoids, Astaxanthin, and Omega-3s that contributes to a full-body training foundation. More intense training, more effective recovery. FULL SYSTEM PROTECTION Omega-3s and curcuminoids efficiently populate cell membranes, where they are precursors and enhancers for signaling molecules that help maintain normal, healthy musculoskeletal tissue integrity and cardiovascular, cognitive, and immune functions. By managing inflammation-triggering enzymes and supporting cell membrane function throughout the body, HALO helps keep critical systems at peak efficiency to respond to your body’s need to perform. SOURCED FOR EFFICACY, PACKAGED FOR PROTECTION From the Superba2™ krill oil to the 95% pure curcuminoids from turmeric rhizomes, HALO’s effectiveness is rooted in its premium formula. Every component is sourced to maximize uptake and effectiveness, and the active ingredients are packaged in an amber glass bottle, which stabilizes and preserves notoriously vulnerable ingredients. A COMPREHENSIVE PERFORMANCE SYSTEM The overlapping, system-wide nature of HALO’s performance benefits aligns with First Endurance’s comprehensive approach to endurance athletics. Our line of supplements supports every aspect of endurance training rather than just supplying sugar and salt during exercise and protein during recovery. HALO, MultiV, and Optygen are the equivalent of building a base of fitness, ensuring your body’s infrastructure is equal to the exertions and stress of dedicated endurance training.
$54.95
- Proof that white powdercoated spokes don't have to cost a fortune - Straight gauge steel, durable coating resists scratches - Box of 100, includes 14g black brass nipples
$51.99
- Large capacity handlebar bag - Highly water-resistant zipper and material - High-quality, durable materials - Top-opening for easy access - Adjustable straps and simple Velcro mounting system - Reflective features and light mounts for added safety - Size: 26cm x 13cm x 13cm - Capacity: 2.2L - Weight: 143g
$44.99
- Uniquely formulated synthetic Halo Touch surface with prismatic texture sure to turn heads while improving grip and providing all-out performance. - Multi-layer, multi-density foam laminates effectively absorbs shock, dampens vibration and minimizes fatigue. - Highly elastic and lightweight organic adhesive will not leave residue on the handlebars to ease installation and adjustment. - Reusable, expanding locking bar plugs are reliable and resistance to falling out. - Highly elastic finishing tape does not deform, degrade of soften in extreme temperature and weather conditions.
$39.00
- Hard Shell Plastic Outer Layer Featuring Gridguard Technology - Inner Layer Lined With Impact Absorbing Eva Foam - Adjustable Elastic Straps For Secure Fit
$35.95
- 10 x 135mm adapters for 6-Drive rear road disc hub - Includes: two adapters and one disc rotor spacer - Conversion kits for Spin Doctor 6-Drive hubs are not compatible with original Spin Doctor and Spin Doctor Pro hubs
$35.00
- Precisely engineered and CNC machined to the highest standards - For further fitment details please see: pilo.co.il/derailleur-hangers-new.html + Carrera Cube Haro XDS
$34.95
Compatible with Variable Lens System (VLS) goggles only. This lens system allows for the transfer of standard and injection molded lenses in the same frame. Airspace and Main goggles share the same standard and injection molded lens as well as tear-offs. Our Spark lens is mirrored for improved visibility and reduce glare in bright daylight. - Variable Lens System™ (VLS) replacement lens - Injected-molded polycarbonate hard lens - Pre-curved design offers superior optical clarity - Offers 100% UVA and UVB protection - Mirrored lens
$29.95
- Straight gauge steel - Box of 100, includes 14g black brass nipples
$29.95
- All purpose urban/hardpack tire with wrap-around tread for traction at hard angles - Twin rails keep tire tracking straight with minimum rolling resistance - Puncture Protection System for reduced flats - Non-folding - 545g
Page 1 of 2 Next page