Wheels

Wheel Freehub Kit—XDR Driver Body Kit—Zipp ZR1 Compatible With: WH-202-FTLD-A1, WH-303-F650-A1, WH-303-FTLD-A1, WH-303-FTLR-A1, WH-303-FTUD-A1, WH-303-FTUR-A1, WH-404-FTLD-A1, WH-404-FTLD-B1, WH-404-FTLR-A1, WH-808-FTLD-A1, WH-808-FTLR-A1, WH-SP9-TLD-A1, WH-SP9-TUD-A2, WH-SP9-TUR-A2

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle

Boostinator kits allow non-boost wheels to be mounted in Boost spacing frames and forks. While incremental, the benefits of the "Boost" 15x110mm front and 12x148mm rear axle standards are clear: better clearance for fatter tires & rims and reduced dish for stiffer, stronger wheels. The big bummer? Taking full advantage requires not only a new frame and fork, but new wheels as well. In response, we have developed the Boostinator. When paired with compatible 15x100mm or 12x142mm hubs, Boostinator kits allow existing wheels to be mounted in Boost-standard frames and forks. Disc and drivetrain positions are maintained and, thanks to a quick re-dish, spoke bracing angles are improved. Boostinator kits consist of a specially-designed axle end cap and, in the case of rear kits, a precision-machined rotor spacer with a set of six high-strength bolts. In keeping with Boost specifications, the disc and cassette are shifted outboard, allowing brakes and derailleurs to function as designed. Compatibility: - Front boostinators are only an endcap and do not require a rotor spacer. The wheel is re-dished. - Rear boostinators require both a re-dish and rotor spacer. - Rear Boostinator kits are not approved for rotors larger than 183mm. - Hubs spacing is 100mm front and 142 rear, and the Boostinators make them 110 and 148 respectively. - Compatible with 6-bolt FRONT wheels and SOME centerlock models. - Compatible with ONLY 6-bolt REAR wheels (there is no way to space centerlock rotors over 6mm). - NOT recommend (or safe) for non-symmetric lacing like the 2:1 lacing found on some of Industry Nine's wheels. *Note: You will need to re-dish your wheel after installing any Boosinator. Boostinator DR: - The Boostinator DR is compatible with DT-Swiss 12x142mm Star Ratchet (240- and 350-series) rear hubs with 6-bolt (IS) rotor mounts. - Centerlock hubs are not supported. - 180- and 190-series hubs are Centerlock only. - The Boostinator DR is also compatible with some complete wheels from DT Swiss, Roval (Specialized), Giant, Syncros (Scott), and others that use DT's Star Ratchet internals. - Remove the disc side end cap. Bearing size 6802 15x24. - Net weight: 18g Boostinator HR: - The Boostinator HR is compatible with 12x142mm Hope Pro 2 EVO and Pro 4 rear hubs. - Non-EVO Pro 2 hubs are not supported - Net weight: 18g Boostinator 9TR: - Compatible with 142x12 rear Industry Nine Torch hubs. - Not compatible with 2:1 lacing wheels from Industry Nine - Not compatible with Centerlock hubs Tech Specs: - Material: 6061 aluminum - Included: Rear kits come with appropriate-length Class 10.9 bolts, each roughly 40% stronger than more common Class 8.8 hardware.

The Wolf Tooth Rear Axle uses a captive steel washer under the head to reduce friction on the dropout face. This protects your expensive frame, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. - Made in Minnesota to aerospace standards

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum Not compatible with RS-1 fork

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Upgrade or refresh your bike. - Steadfast, durable, and able to ramble over anything - Wide enough to handle a super-fat tire and a sizeable tire patch - Strategic cutouts to reduce overall weight - Tubeless setup with STR Tubeless technology, sold separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Surly Rim Strips have one job and they do it well. They cover the cutouts in your rim and — if you're running a tube — they protect it from spoke heads and other sharp matter (okay, so maybe they have TWO jobs but they do them both really well.) Rim strips are crucial and should be used with all Surly rims. Ours come in an array of colors so you can really "express yourself." Surly Rim strips are available in two different materials: PVC and Nylon. PVC is great if you plan on only running tubes. However, if there's any part of you that wants to try this tubeless thing you've been hearing about, Nylon strips are just the ticket. They're thinner and offer minimal stretch so they stay put and lay nicely inside the rim to provide a secure seal. Plus, they're lighter which we all know means you'll go faster… maybe.

- Replacement rear skewer - Spacing: 135mm - Material: Steel

Product specs: - Size: 26?, 27.5" (sleeved only) - Outside width: 29mm - Inner bead width: 23.4mm - Section height: 21mm - Weight: 26?- 520g, 27.5"-562g - Type: sleeved or welded - Brake compatibility: disc only - Hole count: 32

Product specs: - Size:24", 26", 29" - Width:33.5 - Bead width: 33.5mm - Inner bead width: 26mm - Section height: 25.5mm - Weight (26"): 660g - Sleeved or welded - Hole count: 32, 36

Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)

Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - Legendary Crest climbing and speed in a high volume rim

Durasync freehub bodies feature triple freehub bearings for increased axle stability to handle even greater vertical and torsional loads. This CNC machined durasync freehub is a direct replacement for your Neo hub, and includes pawls, springs, pawl retaining ring, and red freehub spacer. Bearings are pre-installed. - 6-pawl system provides 36 points of contact and 10-degree engagement for quick acceleration - Chromed steel bearings - Wide bearing stance and axle design reduces flex and adds durability - Low drag main seal prevents contamination and reduces resistance - Mini Driver has a Shimano HG spline, but is 10mm shorter to accept 11-speed cassettes with 10t cogs from Hope and OneUp Components

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Lay down Stan's Universal Kit Rim Tape before the tubeless conversion of your non-Stan's rims. It makes your rims air tight and ready for tubeless use by covering the spoke holes.

Sta Tru Rear Wheel - Single Wall rim - Wheel Size: 18-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 355 / 18-inch BMX - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - ISO Diameter: 507 / 24-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

Replacement Alloy HG Freehub Body, with Anti-Bite technology, for all HEX Rear Hubs. Compatible with: - All HEX J-Type, Straightpull, and Gravel rear wheels Not compatible with: - SPIKE/OOZY/SPOON hubs

- An ultra-wide, high performance alloy rim, weight optimized for Enduro, Trail and All Mountain use - Tubeless ready with anti-burp rim hooks to prevent the loss of pressure and keep tires firmly in place - 32 holes with an inner width of 35mm and outer width of 39.5mm provides ultra-wide support for Plus-Size and high volume tires - The corrugated rim center, a brand acclaimed technology, adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shotpeen finish to increase fatigue life and make it more durable - MGR Dynamal Alloy

- Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width is extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use without negative squaring off of tire profiles. - Ideal for DH and Freeride. - Tubeless Ready - Technologies: BeadBite Anti-burp, OohBah Inverted Inner Wall

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Right Axle End Cap

These MTH 716 Conversion Caps allow your SRAM MTH 716 front hub to accept a 15 x 100mm thru-axle.

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

Maxle Lite Lever Assembly - Fits Maxle Lite - Includes lever section only

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

The ARC Offset rims utilize an asymmetrical design to optimize spoke tension balance, wheel durability, and wheel stiffness. Its 6069 Alloy construction provides a superior strength-to-weight ratio, significantly improving toughness. - Offset nipple bed for improved spoke tension balance and wheel strength/stiffness - Strong tire retention bead - Tubeless ready

The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.

Best seller. You'll be hard-pressed to find a better wheel anywhere near these prices.

Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.

Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable

The Muc-Off Tubeless Rim tape is made from their proprietary performance material with a pressure-sensitive adhesive to provide just the right amount stretch whilst maintaining durability and strength needed to create a lasting airtight seal. Semi-transparent material makes locating the valve hole easy.

The Mission Engage rear cassette wheel is a fully sealed hub, 3-cross laced to the rugged Mission Mylar double wall rim. Heat-treated chromoly axle, 5 precision sealed bearings, and stainless-steel spokes make the Engage wheel a solid ride. - Hub: Mission Engage Cassette - Rim: Mission Mylar - Weight: 46.1oz

These lightweight valves help prevent clogging from tubeless sealant. - Aluminum - 40mm length

Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made from start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles, and endcaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing, and assembly is done to exacting standards. - 690 P.O.E. Hydra Freehub body engages every 0.52 degrees, yielding telepathic control - 6 pawl, 6 phase - 115 tooth drivering - Easily serviced with no proprietary tools—designed to keep you in the saddle and out of the service queue

Replacement freehub kit for Hydra hubs

Industry Nine Torch end caps allow the conversion to a variety of front axle standards. - Includes a pair of end caps

Industry Nine Torch end caps allow the conversion to a variety of rear axle standards. - Compatible only with Torch hubs and wheelsets - Includes two end caps - Compatible only with Torch MTB and Fat Bike hubs (not compatible with Road or CX Disc hubs)

- Strong nylon reinforced PVC for a secure fit - Handles high-pressures; does not rot - 0.5mm thick

Grade 10 chromium steel balls

- Extra security against theft - 5mm hex CrMo axle

- Standard American Schrader Valve - CNC Machined from 6061 T6 aluminum - Knurled body for added grip - Sold as a pair - Upgrade your plastic caps with some style - Compatible with all Schrader valve tubes, including cars, motorcycles, wheelbarrows, tractors, and more - Weight: So light they will not register on our scale

Knurled aluminum body for better grip. = CNC Machined from 6061 T6 aluminum

Dependable Independence – Reliability, versatility, and simplicity are united in a hub. Thanks to the proven freehub Ratchet System, the 350 hub is a dependable partner for every adventure. The 36-tooth ratchets ensure direct power transmission. The sophisticated yet simple construction of the hub allows a low weight while providing outstanding rolling performance. Furthermore, it enables cyclists not only to maintain their freehub system without special tools but also to convert to the various standards. The intention behind the 350 was to create a dependable hub that supports cyclists in their independence. PRODUCT DETAILS: - A DEPENDABLE HUB The freehub Ratchet System makes the 350 the dependable partner for any ride - NO TOOL CONCEPT Plug-in hub construction allows for quick and tool-free maintenance - NEW ENDCAPS The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly - VARIETY The 350 hub is available for all common axle standards and for the various drivetrain systems. TECHNOLOGY: We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies. LEGENDARY RELIABILITY: The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability. The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provides reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal